2021.11.23 3D printing ep. 2

Glass beds are amazing. tl;dr, print at higher bed temp with glass bed

Previously, we had the plastic bed that came with the creality printer. the prints were stuck pretty hard to the plastic, so every time it was a bunch of trouble to scrape it off and then we had to recalibrate between every print, because clipping the plastic back on always knocked the calibration a bit.

With the glass bed, the print comes right off!!!!

...

Which leads to problems with bed adhesion.

Here you can see the bed adhesion problem when printed at 60 degrees, which was the temp we were using for the plastic bed.

So yeah, there you have it! If you get bed adhesion problems, print at a higher temp!